How to install a cabo light box on the wall?

How to install a cabo light box on the wall?

Cabo light box installation instructions are as follows:

1, the light box profile, corner code, screws, screwdriver ready, and then cut the 45° Angle of the light box profile corner diagonally aligned, and then use the corner code splice together, each corner of two screws fixed, so that the light box frame is assembled.

2, if the light box is installed directly on the wall, you can install without backplane, first fix the light box bracket with screws on the wall, and then hang the light box frame we have fixed in advance on the light box bracket.

3, the installation of the led light bar is similar to the light box, first connect the hook and the light bar buckle with a cable tie, and then hang the led light bar on the light box profile, and install the power supply (positive gray line, negative white line) on the edge of the outer frame where the wire is out.

4, hang the light strip on the two ends of the profile, can be installed, and finally installed on the canvas, there are silicone strips around the canvas, just insert the silicone strip into the aluminum profile frame.

Outdoor caboodle light box door protruding how to install?

The method of installing the protruding of the door head of the outdoor caboodle light box is as follows:

1. First determine the position and height of the light box installation, and then fix the protruding part of the light box door head on the wall or hanging frame.

2. Fix the protruding part of the light box door head to the wall using screws or fasteners. Ensure that it is firmly fixed to withstand the effects of natural environments such as wind and rain.

3. Install lighting equipment behind the protruding part of the door head. You can choose LED strips or floodlights suitable for outdoor environments.

4. Connect the lighting device to the power supply to ensure that the light works properly and meets safety standards.

5. After installation, check the light box to ensure that there is no loose part, and waterproof treatment to avoid water and rain into the light box. This is a general installation method, the specific steps may vary according to the actual situation. Before installation, it is recommended to consult a professional decorator or manufacturer for accurate installation instructions.