How to install the tag guide light box?

The installation steps of the tag guide light box are as follows:

First, you need to determine the installation location. According to the actual size of the light box and the position of the mounting hole on the back, or the specific environment of the site, select the appropriate installation point. This step is crucial because it will directly affect the subsequent installation effect and the stability of the light box.

Next, choose the appropriate fixing method according to the material of the installation position. If the installation location is a cement or brick wall, use a percussion drill to drill holes and then install expansion screws to secure the light box. For wood or aluminum-plastic board and other materials, you can directly use screws to fix. If the installation position is a hard surface such as tile or marble, drill through the surface with a glass drill bit and then drill an expansion screw hole to fix it. In some cases, it is also possible to consider the use of adhesive fixation, but it is necessary to pay attention to the selection of adhesives and the application method to ensure the fixed effect.

Before fixing the light box, you also need to perform wiring operations. Normally, the power cord outlet for the tag guide light box is located on the back. If the on-site power supply is also at the back of the light box, you can directly cut the plug of the power cable, connect it directly, and wrap the interface with an insulating cloth to ensure safety. If the power supply is outside the light box installation range, you need to change the outlet line of the light box power supply to the edge of the light box, and use a three-phase plug into the power outlet. During the wiring process, be sure to pay attention to safety to avoid accidents such as electric shock.

Once the wiring is complete, you can start fixing the light box. First of all, the top cover of the light box needs to be opened, and then drilling operations are performed at the predetermined installation position. After drilling holes, insert the power cables through the holes and secure them to ensure that they are not loose or exposed. Then use tools such as a level to adjust the level of the light box to avoid skew or shaking after installation. Finally, the light box is fixed in the installation position, and the power is adjusted. If everything is normal, the light box will light up, and the surface of the light box can be wiped clean at this time to complete the installation process.

During the entire installation process, pay attention to safe operation and standard construction. Ensure that all tools and materials are of reliable quality and are operated in accordance with instructions or professional instructions. If you encounter any problems or difficulties, you should seek help or consult a professional in a timely manner.