blog

crystal led light box display can significantly improve the lighting effect by using a high brightness lamp strip as a light source. The high-light led strip is not only brighter, but also emits uniform light, which can effectively reduce the scattering of light, make the light more concentrated, and improve the lighting efficiency. In addition, the spectral distribution of the led strip is more concentrated, which is conducive to the production of purer and higher quality light, making the display effect of the ultra-thin light box more excellent. In practical applications, the brightness and luminous efficiency of the led strip can be adjusted according to needs to meet the lighting needs of different scenes.   crystal led light box display is a more popular type on the market. This light box uses high-quality led light strips to provide excellent lighting while maintaining an ultra-thin appearance. The lattice design is not only beautiful and generous, but also can enhance the orientation of light, make the light more concentrated, and improve the lighting effect. In addition, this light box usually has good heat dissipation performance, which can effectively avoid the brightness attenuation caused by overheating and extend the service life. In order to make the crystal led light box display achieve a particularly bright effect, several aspects need to be considered. First of all, choosing the right led strip is crucial. High-quality led strips not only have high brightness, but also good light efficiency, which can provide lasting and stable lighting effects. Secondly, reasonable layout design is also very important. Through the scientific layout, you can maximize the lighting effect of the led light strip and avoid light waste. In addition, good thermal design is also one of the key factors. The led strip will generate heat during the working process, and if the heat dissipation is poor, it will affect its brightness and life. Therefore, when designing the led ultra-thin light box, the heat dissipation problem must be fully considered to ensure that the light box can maintain a good lighting effect for a long time.   In short, to make the crystal led light box display especially bright, you need to consider a number of factors. Choosing the right led strip, reasonable layout design, and good heat dissipation design are all key factors. Through these measures, we can give full play to the lighting advantages of the led light strip, so that the led ultra-thin light box can achieve the best lighting effect.

The setting of LED light box mainly includes selecting the appropriate light box, determining the installation position, fixing the installation and adjusting the brightness.   When setting up an LED light box, you first need to choose a back light box that is reliable and suitable for your needs. This requires consumers to choose a professional and formal manufacturer to buy, to ensure that the material, workmanship and function of the light box can meet the requirements of use. At the same time, inform the business of their own use of the environment and other objective conditions, in order to select the most suitable light box products.   Next, determine the installation location of the LED back light box. This needs to choose the installation method according to the actual situation of the site and the type of light box. For example, if the site wall is aluminum-plastic board, wooden board, iron plate, etc., it can be fixed directly with self-tapping screws; If the wall is cement or brick, you need to drill the hole with a hammer drill and then fix it with an expansion screw. After determining the installation position, measure and determine the fixed point for installing the light box according to the location of the mounting hole on the back of the light box or the actual size on site.     During the installation process, the LED light board is spread out along the aluminum frame, and holes are drilled on the light board, and the light board is fixed on the aluminum frame with screws. After fixing, power test is carried out to ensure that the light box can emit light normally.   If the light box is found to have uneven brightness or other problems, it can be solved by adjusting the LED dimmer. For example, when using the Bluetooth dimmer, just turn on the Bluetooth of the mobile phone, scan the two-dimensional code on the dimmer to enter the mini program control page, and then drag the brightness bar or select the device that needs brightness synchronization, you can easily adjust the brightness.     In addition, you also need to pay attention to some safety matters when setting up LED light boxes. For example, the light box should be carefully placed during installation to avoid breaking; Pay attention to the heat dissipation of the light box during use to avoid damage caused by long-term high temperature operation; At the same time, it is necessary to regularly check the line and connection of the light box to ensure that there is no loose or leakage phenomenon. Through the above steps and precautions, you can ensure that the setup of the LED light box is safe and efficient.

Blister light box is a product made of three-dimensional luminous character processing technology, and its main material is acrylic. Acrylic materials are widely used in blister light boxes because of their stable quality, which makes blister light boxes have many superior characteristics. First of all, the blister light box has excellent light transmission. Due to the properties of acrylic materials, the blister light box can evenly distribute light, so that the text or pattern can be clearly visible during the day and night. Secondly, the blister light box has the advantage of clear far-sightedness. Whether up close or long distance, the blister light box can provide good visual effects because the acrylic material is able to effectively reflect light and maintain clarity even in low light.   In addition, the blister light box also has the characteristics of high compressive strength. The hardness and toughness of acrylic materials make the blister light box able to withstand the influence of various environmental factors, such as temperature changes, humidity fluctuations, etc., so as to ensure the service life of the product. More importantly, the color of the blister light box is extremely durable. Because the acrylic material has good weather resistance, the color of the blister light box will not fade in more than ten years and always remain bright as new. This makes the blister light box become the first choice for sustainable management and strong businesses. However, the blister light box also has its shortcomings. First of all, the price of acrylic materials is high, which makes the cost of the blister light box relatively high, for some small businesses, may increase a certain amount of operating pressure. Secondly, because the production process of the blister light box is relatively complex, the production cycle is long, which is not conducive to rapid response to market demand. In addition, the blister light box requires professional technical personnel to operate during the installation process to ensure the installation quality and effect.   In summary, the blister light box has many advantages, but there are also certain disadvantages. When choosing a blister light box, businesses need to consider their own needs and budgets comprehensively in order to make an informed choice.

Advertising light box, continuous flashing combined with stay, effectively improve people's visual impact; It improves the utilization rate of advertising unit area, and the advertising effect is self-evident as that of transforming light boxes and rolling light boxes. Advertising light box set the advantages of neon in one, day and night can be uninterrupted flashing, static and static combination to attract people's attention. All kinds of text, pattern orderly jump, alternating glow, strong visual impact. Meet the viewer's visual feelings, and promote the advertiser to obtain the maximum economic benefits. LED electronic flashing light box will be a shining pearl in the future advertising industry dynamic light box. The backlight module formed by the light guide plate and the combination of a variety of outer frame materials are made of a new multi-functional advertising carrier, which integrates the advantages of ultra-thin, fashion, energy saving, uniform and comfortable illumination, easy installation and maintenance, etc., and is suitable for any commercial area. The shape has single-sided card, double-sided card, arc card and indicator plate.     Production points:   Design: According to the design requirements of customers to formulate the size of the light box, color, the main and secondary arrangement of the font text changes, horizontal and vertical placement. In addition, it is necessary to determine the support at the installation site. Based on the design, calculate the size, font and color of each word, and search the word. Keel: Generally hexahedral. Material: 20×20 or 30×30. Angle iron: conditional processing, unconditional processing. Wood: Use 2 x 2 cm square wood for nail frame. Cutting: four pieces of length and width, minus 0.5 cm = wood length for both length and width. Two sawed 2x1 tenons, coated with white latex and nailed on. Thickness dimension minus two material thicknesses +0.5= thickness length. And then white latex and nail it down. Water Cube channel advertising. Aluminum material: ground cabinet aluminum alloy material, height, width and length dimensions unchanged. Sawed at a 45 degree Angle and joined with plugins. Ann lamp: Generally use two or three daylight tubes.     40W1.2 meters long lamp tube, with more than 1.3 meters light box. 30W lamp 0.9 meters long, used in light boxes above 1.1 meters. The thickness is usually 20-25 cm. Upper board: Nail small nails (15MM), first use an electric drill to drill a small eye, otherwise hard nails love cracks, nails on the most edge of 5MM, more than one meter long nails on three or four. Only 4 nails are needed for the 20MM wide side plate. Drill holes in the side to get the wires out.

Digital signage is considered to be the fifth media, in fact, is what we often say advertising machine, it has a management system, you can achieve the management of digital signage through the system. Digital signage management system has many functions, including program production, schedule management, terminal management, terminal monitoring, rights management, advertising management and many other functions. The advantages of the digital signage system are mainly reflected in the centralized control and management, real-time release of information, stability, security and so on.     What are the functions of the digital signage management system? Digital signage refers to the large shopping malls, supermarkets, hotel lobbies, hotels, airport subway stations, theaters and other public places where people gather, through the large screen terminal display equipment, the release of commercial information, financial and entertainment information multimedia professional audio-visual system, in short, advertising machine, it usually has a built-in management system, the functions of digital signage system are mainly: 1. Program production Support based on the WEB page to see and get self-word visual program production, screen area free segmentation, free combination of video, pictures, FLASH, PPT, subtitles and clock weather forecast and other real-time information. 2. Schedule management Flexibly set the program schedule at any time, manage the schedule in detail according to the time period, make the broadcast plan without time limit, and switch the displayed program content according to the pre-customized date and time.   3. Terminal management The digital signage management system adopts a distributed point-to-point information release mechanism, and users can specify display terminals to play independent pictures or unified pictures according to different places, and can specify any display terminal at will. 4. Terminal monitoring The remote display terminal connected to the control terminal can be fully controlled, including restart, shutdown, volume adjustment, monitoring screen, remote control, terminal grouping, playback status and download list monitoring, and terminal screen acquisition. 5. Permission management Support account management, allowing each user to assign different function module management rights, allowing different users to assign different players, different program playback rights, etc. 6. Advertising management Each advertisement can include one or more media files, you can specify the number of advertisements in each playlist and the insertion order, control the placement of advertisements on the screen, statistics of the number and time of daily advertisements.   Advantages of digital signage systems 1. Centralized control and management Digital signage system through the WAN network remote control, no manual change card, card, software upgrade can also be remotely operated, no manual presence, very convenient. 2, real-time release of information Real-time information can be released immediately, such as emergency information, emergencies, interstitial media files, etc. 3. Stability Efficient and stable embedded design, plug and play, no need to worry about virus infection. 4. Information security The use of special price technology can control all non-audited programs, effectively ensuring the safety of advertising media communication.

Hanging advertising machine is a common commercial advertising display equipment, usually suspended on the ceiling or bracket, suitable for places with large traffic. Its unique design and functions give it a significant advantage in advertising display and information delivery. The following are the main features of the hanging advertising machine:   1. High space utilization rate Hanging design: Hanging advertising machine adopts hanging installation, does not occupy the ground space, especially suitable for limited space places, such as shopping malls, subway stations, airports, etc. Wide field of view: Hanging at a high altitude, can cover a wider field of view, to ensure that the advertising content is seen by more people.   2. Flexible installation and strong adaptability Multiple installation modes: Support single-machine suspension or multi-machine splicing to meet different scenarios. Adjustable height: According to the height of the site and the sight line, the installation height can be flexibly adjusted to ensure the best display effect. Wide range of application scenarios: applicable to shopping malls, supermarkets, stations, airports, exhibition halls, hotels and other places.   3. Hd display, strong visual impact High resolution: usually supports 1080P or higher resolution, the picture is clear and delicate, and the advertising content can be vividly displayed. High brightness: Brightness ≥2000lux, to ensure that it is still clearly visible in bright environments, to avoid reflective or dim picture problems. Wide viewing Angle: Use a wide viewing Angle screen to ensure that the picture is not distorted when viewed from different angles.     4. Energy saving and environmental protection, stable operation Low power design: Energy saving technology, low power consumption, reduce long-term operating costs. Stable and durable: Support 7×24 hours uninterrupted operation, suitable for high-intensity use scenarios. Good heat dissipation performance: Built-in efficient heat dissipation system to ensure long-term stable operation of the equipment.   5. Versatility and intelligence Multimedia support: Support pictures, videos, text, animation and other media formats to meet diversified advertising needs. Remote management: Through the network remote update content, convenient and fast, save labor costs. Timing playback: Supports timing switch and content playback to adapt to the advertising needs of different time periods.   6. The appearance design is fashionable and beautiful Ultra-thin body: the body thickness is usually ≤2cm, the appearance is simple and fashionable, and the modern business environment is perfectly integrated. Narrow border: Narrow border design to improve the screen proportion, enhance visual impact. Material quality: high strength material, durable and beautiful.   7. Security and easy maintenance Safety protection: Equipped with dust-proof, moisture-proof, shock-proof design, adapt to complex environment. Easy maintenance: Modular design, easy disassembly and maintenance, reduce later maintenance costs. Anti-theft design: Some models are equipped with anti-theft locks to ensure equipment safety.   8. Interactive function (some high-end models) Touch screen: Support touch interaction, users can get more information or participate in interactive activities through the screen. Face recognition: Some models support face recognition technology, which is used to count passenger flow or push personalized ads. Data statistics: Built-in sensors can count the number of viewers, stay time and other data to provide support for advertising effect analysis.   Hanging advertising machine with its high space utilization, flexible installation, HD display, energy saving, environmental protection, versatility and other characteristics, become the ideal choice for commercial advertising display. It can not only effectively attract customer attention, but also improve advertising effectiveness and management efficiency through intelligent functions. Whether it is shopping malls, stations or exhibition halls, hanging advertising machines can provide strong support for brand promotion and information transmission.