Wall crystal light box unique visual effect. In recent years, the wall crystal light box has also developed rapidly. However, a wall crystal light box requires the correct installation method before it can demonstrate its good advantages, so the following small series will explain how to install a wall crystal light box.
What are the installation steps of the wall crystal light box?
1, fluorescent tubes usually use fluorescent tubes T4 or T5 wrapped in a reflective film on both sides of the uniform plate. For ultra-thin light boxes with small size light guides, the manufacturer can be asked to provide a hard LED light strip that usually has a patch type and a straw hat type. And retain the position of the ballast and lamp. The final surface of the homogenized plate is polished.
2. Shine light on the light guide plate, add transparent plexiglass panel, cover the outer frame, fix the frame, and make the light plate ultra-thin.
3. Apply double-sided tape around the optical protection board, and install a reflective film on one side of the optical protection board. Usually, the reflective film is made of white PET reflective film, and high gloss photo paper can also be used.
4. Connect the ballast and place the lamp, light guide and ballast in the lower frame of the light box. The frame of the light box can be opened for future replacement of the bulb. The frame can be made of aluminum alloy, wood, stainless steel, plastic, etc. The appearance is based on your own preferences.
Wall crystal light box should pay attention to what?
1. Pay attention to stability. The shape of the glass lamp is more complex, there are many accessories, and the weight is not light. When installing, it is necessary to consider not only the load capacity of the upper surface, but also the stability of the backplane and the lamp plate. All types of screws used to secure the glass lamp should be tightened, especially the expansion screws for the backrest rod and lamp plate. Be sure to tighten it completely to prevent the bulb from swinging. In addition, the bearing capacity of the nut carrying the entire lamp must match the total weight of the glass lamp, otherwise it will decrease due to insufficient load capacity.
2. Watch out for power outages. Any lamps must be disconnected before installation, especially when connecting cables and installing bulbs, to avoid the risk of electric shock and endanger life safety.
3, accessories should be light. Crystal balls or glass wires in glass lamps are usually synthetic. Although not as hard as natural glass, but not easy to use. However, if the attachment has glass tubes, special attention needs to be paid when seriating and fixing. Be careful not to break the glass tube.
4. Watch your height. When installing the suspended glass lamp, pay attention to the height of the lamp. Since glass lamps usually have crystal pendants, these pendants will vertically extend the volume of the lamp. If the installation height is too low, not only will the pressure be felt, but the brightness of the lamp will also be uncomfortable, and the pendant will be suspended. There may also be security concerns. Do not choose a pendant that is too long for decoration.
Your message must be between 20-3,000 characters!