What are the steps of making a general wall light box?

What are the options for wall light box production?

The first is the choice of large outdoor wall advertising wall light box production. At present, the acrylic board seen in China is basically imported or foreign joint venture production, and the quality of the board should be better. The reason for the high price of acrylic blister light box is that the high price of sheet metal is one of the main factors. Moreover, the utilization rate of the whole board in the production process is not high, which leads to a large amount of cost amortization.

The second is the production of large outdoor advertising wall lamp box mold. As we all know, acrylic plates are formed by vacuum positioning and suction molding. Even if it is the same word, different sizes require different molds, and the molds themselves require high precision and high quality. Since the precision and quality of the mold itself is directly related to the quality of the acrylic product, and the production of the mold has a high level of technology, it requires experienced technicians. Therefore, as mentioned above, the current price of plastic light boxes on the market is high, and it must be said that mold processing is the most important technology.

The third is the production of large outdoor wall wall light box after production. As mentioned above, the production of acrylic blister is basically mechanized, and the application of some new equipment greatly reduces the labor intensity of workers, while improving production efficiency. After basically forming the acrylic plastic material, several processes must be gone through, such as milling, drilling and milling, and polishing. Finally, the light box is placed with a light source and finished after baking.

The fourth is the processing of outdoor large wall advertising light box screen wall light box production. According to the different needs of customers, by directly printing the screen, the image is transmitted to the acrylic plate, and then vacuum pressing, the image has characters, animal or commodity images, can also be molded in the body effect, which can let you get better advertising effect.

How should wall light box production be done?

The wall light box is made of acrylic board, plastic board or other insulating materials, mainly used for 2.5mm black double-layer aluminum and plastic board. Using double-sided paper with adhesive to first record, adhere to the plastic panel and aluminum cutting size, and drill out with an electric drill or engraving machine (the interval according to the size of the word, the general distance is 10-15 mm), the size of the hole diameter of 5 mm can not be too large. To use an F5 reflector to say that the space between the holes must be greater than 15 mm, we all know that. If the oval lamp 546 is used, the through hole can be controlled between 20 and 10mm, and the shorter the distance, the better. Depending on the number of leds of various colors that can be connected in series, there should be no more than 120 red leds per string. The reason is simple: the controller output is about 210 V DC and the voltage for red light is about 2V.