2025-02-06
The light box billboard wire can be connected through the following steps:
1. First, determine the connection method of the wires inside the light box and the external wires, for example: there are 5 wires inside the light box that need to be connected to the external control device.
2. Match the ends of the wires inside the light box and classify them by color for easy wiring.
3. Determine the wiring method of the external power supply, for example: there are three wires in the external control device that need to be connected to the power cord.
4. Peel off a certain length of insulation at the end of the power cord and the internal wires to expose the copper wire.
5. Connect the internal wires and external wires of the same color according to the corresponding colors. Generally, use insulating sleeves to insert the ends of the two wires and tighten them.
6. Check whether the wiring is correct, and wrap the wiring with tape or electrical tape to ensure that there will be no short circuit or leakage due to looseness or introduction of moisture.
7. If there are multiple light box wirings that need to be connected, they can be connected in series or in parallel.
Notes:
1. Before wiring, make sure the power is turned off to avoid electric shock.
2. When wiring, use appropriate tools, such as wire strippers, wire crimpers, etc., to avoid hurting your fingers when handling wires.
3. When wiring, carefully check the connection method and color of the internal and external wires to ensure that they are correct, so as not to affect the normal operation of the equipment.
