blog

The choice of materials for outdoor advertising light boxes should be determined according to specific needs and environmental conditions. Commonly used materials are PVC plate, aluminum plate, glass, etc. Different materials have different characteristics and scope of application. For example, PVC board is light, corrosion resistant, suitable for a variety of harsh environments; Aluminum plate high strength, good weather resistance, suitable for long-term outdoor use; The glass has high light transmission and aesthetics, which is suitable for advertising light boxes that need to display internal products.   With the improvement of living standards and the innovation of technological level. More and more types of advertising light boxes, there are dozens of outdoor advertising light boxes alone, such as outdoor ultra-thin advertising light boxes, outdoor crystal light boxes, outdoor rolling light boxes, outdoor blister light boxes, outdoor double-sided light boxes, outdoor acrylic light boxes, outdoor magnetic advertising light boxes, outdoor intelligent induction advertising light boxes, outdoor lab light boxes, outdoor community rolling advertising light boxes, outdoor bus shelter light boxes, outdoor light boxes Dumpster advertising light boxes and so on. The following Gudbang will take you to understand the specific scope of use of the light box.   The first is the most widely used ultra-thin light box, mainly used in store product display, exhibition hall product display, can be the display of design products, etc., a wide range of applications. The second is the large lab light box, mainly used for large-scale product display, mainly displayed in the exhibition hall product display, railway station product display, as well as the airport product display, etc., a wide range of applications. The characteristics of the Labu light box are mainly that the product display is broad, more grand, and the effect is more spectacular. In addition, the outdoor rolling light box is mainly combined with the outdoor bus shelter to form the bus shelter rolling advertising light box. This collection of human resources and advertising resources in one of the advertising light box, so that the advertising light box coverage is wide, can be popularized by a larger group of people, the form of advertising is changeable, and the content of advertising is diverse. There is an outdoor blister light box, mainly used for bank Windows, shopping mall walls, exhibition hall walls. It saves space and beautifies the environment. The advertising effect is outstanding and other advantages, and they are integrated in the form of advertising light box.

Light box simple production method 1, production: the use of acrylic board, plastic board, or other insulating materials, I use black 2.5mm double-layer aluminum-plastic board when most. The word to be done is first carved with single-sided adhesive paper, affixed to the aluminum plastic board with a good size, and the hole is punched out with an electric drill or engraving machine (the spacing is based on the size of the word, the general distance is 10-15mm), and the size and diameter of the hole can not be too large. With F5 spotlight to do the word is the hole distance is better than 15mm, the reason why everyone will know. If the 546 oval lamp is used, the hole distance can be controlled between 20-10mm, and the closer the distance, the better the effect. 2, series connection: the LED + -, + -,...... + - and + - are welded in series to produce A positive electrode (marked A+) and a negative electrode (marked K-). The connection of the lamp legs needs to be welded with tin, or it can be screwed together and then welded. Always remember: Make sure you weld. Because the LED leg is iron-plated silver, once the current passes through the moisture will quickly rust, will cause hidden dangers to the light box, will also bring no small trouble to the after-sales. There are many conjoined lamps now The use of conjoined lamps can save a lot of time to improve production efficiency, but with only 20 lamps per row, welding is unavoidable. Note: LED long pin is "+" (positive) pole, short pin is "-" (negative) pole. 3, grouping (string): according to not more than the maximum number of light emitting diodes of various colors in the schedule can be connected in series, such as each string of red LED should not be more than 120. The reason is very simple, the output of the controller is about 210V DC, the working voltage of the red light is about 2V, that is, every LED light will be reduced by 2V, if the number of leds is too much, then the output voltage of the controller can not reach the voltage required for the normal operation of the lamp string, the lamp string will not be bright, or the brightness is too low. Note: It is not recommended to add "*" in the schedule. When the number of series LED is close to or exceeds the number with "*", it is easy to cause circuit instability. It should be divided into two or more strings for parallel connection as a group. 4, string into the resistance: according to the number of the schedule will be the appropriate amount of resistance into each series of LED, resistance without positive and negative points, and can be strung in the series of light emitting tube between any two light emitting tubes. Save time and effort by strapping wires where wire connections are needed. Note: Due to the different batch and model of the product, the specific number and string resistance value depends on the working current, the above parameters are for reference only. The current of each branch of the light-emitting diode is best adjusted at 19ma±1ma, and the resistance is 1k/2w, such as 5k, which can be connected with 5 resistance values of 1 thousand ohms and power of 2W. 5. Connect the controller: connect the positive electrode of each series of LED to the positive electrode (red line) end of the controller, and the negative electrode of each group of light emitting tubes to the negative electrode (green line) control end of the controller. The three yellow lines are the output lines of the water side lights, respectively connected to the negative poles of the three groups of side lights. The three positive poles of the side lamp are welded together with the positive poles of the main character. Generally, the controller has a straight bright output line. In the case of no steady on requirements, the steady on output line of the light box should be cut or glued with a glue stick to prevent damage to the controller by breaking with the positive pole. 6, debugging: the connection is correct, it will light up after power, simple method of measuring current, use a multimeter DC voltage file, measure the voltage on one of the 1K/2W resistors at about 15-20V(preferably less than 18V), and then add a resistance beyond 20V and then measure until normal. In order to facilitate the debugging measurement, the controller pattern can be set in the debugging state and the long delay interval state, and the controller output is a large proportion of long on and short off state. Now the controller has a bright output and a constant current to help accurately measure the voltage of the resistance. 7, maintenance: if it is not bright, use the multimeter DC 250V file, the black watch pen is connected to the green line, the red watch pen is connected to the red line, if the indicator beats or in 200-220V, it indicates that the controller is normal; The black watch pen does not move, the red watch pen measures the voltage at both ends of each led in turn, if the voltage difference between the two feet of a LED is very large or no voltage, indicating that the LED is damaged, replace and try again. 8, the assembly of the light box: I introduce is a cheap method, with aluminum profile is beautiful but the cost is higher I did not use. Materials :2*.mm wood keel and 2.*mm aluminum Angle (90°), these materials are generally available in the decorative materials market. I don't need to go into details about how to make it, 9, ideas: There are often new customers ask why the green and blue lights are easy to break, in fact, most of the reasons are not the quality of the lamp, but the novice welding technology has not fully mastered, welding is not smooth, time is too long and caused by the damage of LED lights, which needs to improve welding technology and speed to avoid. There is also the reason for static electricity, green and blue lights are afraid of static electricity, our body and soldering iron have static electricity, so you need to take anti-static wrist (I am free to customers), conditional can use anti-static soldering iron. Then there is the reason why the quality of the selected LED lights is too low.

General materials refer to the basic materials used in the exhibition cabinets of specialty stores and shopping malls, mainly wood materials for the production of flow tables, cash registers, clothing cabinets, etc., such as MDF, density board, flame retardant board, logs, etc.; Have the production of window glass material, tempered glass, flat glass, etc.; Counters need to use hardware accessories; All kinds of lamps for clothing store lighting, such as T5 lamps, Redwood lamps, led lamps, etc.; Image wall logo needs aluminum alloy, etc.   A clothing showcase is a container used to display clothing. The main materials are medium fiber board, (commonly known as density board) specially manufactured fire-proof board, acrylic board, transparent crystal board and so on. Convenient disassembly, transportation, etc. The colors are gold, silver, matte black, pink, gray and many other colors. The top can be installed with light box piece, the cabinet light can be selected fluorescent lamp, spot light, the top with light box. There is no fixed standard, according to the needs of the product and the ground position, can be made standard style or shaped display cabinet. The back plate of the display cabinet placed against the wall is an opaque board, which can be selected in the same color as the appearance of the cabinet, white color or mirror.   A lot of people go to the mall to buy clothes naturally you will be attracted by the color of the clothing exhibition cabinet, you will go to see, but you are not looking at the clothes, look is the clothing showcase, then why does it attract you, you see is not all color, red, green, various colors and so on, but that is how you are attracted. The magic of not simple colors and clothing display cases when combined.

As we all know, the most important part of the light box is the light source, a good and suitable light source can make the light box better luminous efficiency and longer life. What should we pay attention to when choosing light source for light box of different thickness?     1, the light box below 5CM light source should pay attention to what problems?   [A] : First of all, pay attention to the lighting Angle of the lamp, the light box below 5Cm is best to use the Angle of 160 and above the Angle of the lamp bead, in order to ensure the uniformity of the light box; Secondly, it is necessary to choose the lamp beads with high light efficiency, high display finger, and suitable for the color temperature and power of the scene.   2, 5CM-10CM light box selection light source should pay attention to what problems   [A] : First of all, pay attention to the light Angle of the lamp, 5-10CM below the light box is best to use the Angle of 140 degrees to 160 degrees of the lamp bead, in order to ensure the uniformity of the light box; Secondly, it is necessary to choose the lamp beads with high light efficiency, high display finger, and suitable for the color temperature and power of the scene.   3, 10CM-15CM light box selection light source should pay attention to what problems?   [A] : This kind of light box requirements are relatively simple, the general lamp strip on the market can meet the needs, the parameters considered are mainly high light efficiency, high display finger, suitable for the scene color temperature, power and other parameters of the lamp beads; The ease of installation of the lamp strip, the possibility of problems, high sex ratio, etc.;   4, 15CM-30CM light box selection light source should pay attention to what problems?   [A] : This type of light box is mainly used in the past with ordinary fluorescent light box products, mainly with high-voltage products, so that in the wiring and fluorescent lamp, do not need to find a professional electrician can deal with. The basic parameters are also mainly high light efficiency, high display finger, suitable for the field color temperature, power and other parameters; Think more about cost performance. Summary: Different thickness of the light box selection of light source precautions are different. I hope it helps. What's a light box? How do you classify it?   Light box refers to the box type sign or advertising equipment made of glass, etc., which is equipped with lights. Light boxes can be classified according to material, shape, use and so on: 1, according to the material: ultra-thin light box, blister light box, rolling light box, crystal light box, lab light box, electronic light box, EL light box, LED light box, acrylic light box, aluminum light box, glass fiber reinforced plastic light box, stainless steel light box, etc. 2, according to the shape: square light box, round light box, 3D light box, three-dimensional light box, double-sided light box, floor light box, clamshell light box, vertical light box, three-side flip light box, suction lamp box, change picture light box, roll light box, change picture light box, color change light box, rotating light box, etc. 3, according to the use of: road sign light box, bank light box, vision table light box, color light box, advertising light box, indicator light box, etc.   Different light box effects, offers are also different, the specific can be determined according to their own needs.

Wall crystal light box unique visual effect. In recent years, the wall crystal light box has also developed rapidly. However, a wall crystal light box requires the correct installation method before it can demonstrate its good advantages, so the following small series will explain how to install a wall crystal light box. What are the installation steps of the wall crystal light box?   1, fluorescent tubes usually use fluorescent tubes T4 or T5 wrapped in a reflective film on both sides of the uniform plate. For ultra-thin light boxes with small size light guides, the manufacturer can be asked to provide a hard LED light strip that usually has a patch type and a straw hat type. And retain the position of the ballast and lamp. The final surface of the homogenized plate is polished. 2. Shine light on the light guide plate, add transparent plexiglass panel, cover the outer frame, fix the frame, and make the light plate ultra-thin. 3. Apply double-sided tape around the optical protection board, and install a reflective film on one side of the optical protection board. Usually, the reflective film is made of white PET reflective film, and high gloss photo paper can also be used. 4. Connect the ballast and place the lamp, light guide and ballast in the lower frame of the light box. The frame of the light box can be opened for future replacement of the bulb. The frame can be made of aluminum alloy, wood, stainless steel, plastic, etc. The appearance is based on your own preferences.   Wall crystal light box should pay attention to what? 1. Pay attention to stability. The shape of the glass lamp is more complex, there are many accessories, and the weight is not light. When installing, it is necessary to consider not only the load capacity of the upper surface, but also the stability of the backplane and the lamp plate. All types of screws used to secure the glass lamp should be tightened, especially the expansion screws for the backrest rod and lamp plate. Be sure to tighten it completely to prevent the bulb from swinging. In addition, the bearing capacity of the nut carrying the entire lamp must match the total weight of the glass lamp, otherwise it will decrease due to insufficient load capacity. 2. Watch out for power outages. Any lamps must be disconnected before installation, especially when connecting cables and installing bulbs, to avoid the risk of electric shock and endanger life safety.   3, accessories should be light. Crystal balls or glass wires in glass lamps are usually synthetic. Although not as hard as natural glass, but not easy to use. However, if the attachment has glass tubes, special attention needs to be paid when seriating and fixing. Be careful not to break the glass tube.   4. Watch your height. When installing the suspended glass lamp, pay attention to the height of the lamp. Since glass lamps usually have crystal pendants, these pendants will vertically extend the volume of the lamp. If the installation height is too low, not only will the pressure be felt, but the brightness of the lamp will also be uncomfortable, and the pendant will be suspended. There may also be security concerns. Do not choose a pendant that is too long for decoration.

According to the customer's questions, the following suggestions are made for reference: There is no limit to installing a vertical light box advertisement at the shop door. See what kind of light box you need. The following describes the characteristics of various types of light boxes: 1. Miniature light box The micro light box mainly has several kinds of small vertical, three-sided rotation, double-sided arc rotation and organic process light box. The miniature light box requires exquisite material selection, exquisite production process, beautiful appearance, no burrs, no gaps, and tight profile interface. Mainly placed on the counter, booth, used to show the value and performance of high-end and valuable goods. 2.Convex word light box Convex word light box is to make part of the text on the screen of the plastic light box convex than the plane of the screen, so that the picture rich three-dimensional sense. There are two kinds of light box practice: one is that the protruding text and light box piece is an advertisement, and there is no seam between the word and the light box piece, which is suitable for small light boxes; The second is to do a good job of blister light box sheet, and then leave out the position of the text to be highlighted, and do a good job of blister word, repair the edge, and use special glue to bond to form a convex word effect, which is suitable for a large light box. 3, walk painting light box Drawing light box is a new type of light box with open aluminum alloy material or high-grade wood as the frame, transparent arc plate as the panel, photo film as the picture, and equipped with electronic control drawing system. The light box can connect multiple photo pictures together at the same time, and each picture can be adjusted according to the required time. Due to its changeable picture, high information content and novel design, it is widely used in large shopping malls or prime locations, which not only saves space, but also shows the dynamic effect. 4, ultra-thin light box The ultra-thin light box is a multifunctional advertising carrier which is composed of main components such as light guide plate, reflector plate and cold aurora tube. Its frame material has two kinds of aluminum and stainless steel, the use of elegant linear design, beautiful appearance, and a variety of colors spray. Ultra-thin light box with its ultra-thin, power saving, environmental protection, easy construction, uniform light, eye protection, beautiful appearance and other characteristics are widely used in subway, airports, stations, trading centers, shopping malls, banks, studios, hotels, large casinos and other indoor places. 5.Combined light box 6. Perpetual calendar light box The perpetual calendar light box is based on a single-sided wall-mounted light box with a perpetual calendar electronic display clock, and the screen can be made according to the needs of users, configuring product advertising information or landscape painting, art photos, etc. Perpetual calendar light boxes are widely used in offices, family rooms, public places, public institutions, shopping malls, stores and other places that need to use advertising, alarm clocks, and photo frames. The appearance of the combined light box is double-sided arc, the light box sheet uses non-breakable plate, the skeleton uses special hardware and aluminum alloy profiles, with the above cover and base, the user only needs to simple assembly when using. Combined light box picture can be film, screen printing, installation in a variety of forms, can be ground, side hanging, can also be hung. At present, the market demand is large, widely used in such as street shops, stalls, as signs or business instructions, business lights to attract customers, stop business after the store, very convenient. 7. Rotate the light box The motor is configured on the basis of the combined light box, so that it can rotate at a constant speed and make the static picture vivid. 8、 Blister light box Blister light box is the general term for the light box advertised by blister method, and its shape has square, round and shaped. The frame of the blister light box is bent by aluminum profile, and the width of the aluminum profile is 6cm, 8cm, 10cm, 11.5cm, etc., which can be selected according to the size of the light box or customer requirements. The larger size of the light box can be reinforced with steel, and the foot of the light box depends on the installation method, which is T-shaped, and is installed on the cylinder with a hoop. The light box sheet is made of acrylic plate after heating, and a raised panel is sucked out by a plastic suction machine as the surface of the light box, and can also be pressed by a press molding machine. Combination, rotation, blister light boxes are widely used in various shop fronts, bank outlets, chain stores, large shopping malls, supermarkets, city streets, road poles, as signboards, indication marks, publicity and display. After introducing the characteristics of the light box, the customer said that he had a clear understanding, and finally selected the perpetual calendar light box as the light box at the door of his shop according to the store.